FTE Maximal HCA 2210/RC Manual De Instrucciones página 9

BCN
headend
Return Path
Return path configuration in HCA 2210 RC
Atention!
Before proceeding to configurate the amplifier, make sure that it is unplugged
from the mains (230 V).
Modifications inside the amplifier must be made by a qualified technician.!
To configurate the return path some JUMPERS must be used at the input and output of
the amplifier.
Modification must be made on the four JUMPERS at the same time, any combination
that is not one of the two showed in the shceme below, will make bas functioning in
the return path of the amplifier.
= Close contact
= Without contact
Any other combination IS NOT CORRECT!
View of the amplifier without rear
metallic cover.
Power supply
Jumpers' configuration for
return path 5-65 MHz
HCA 2210/RC
View of the amplifier without rear
metallic cover.
Power supply
Jumpers' configuration for
return path 5-30 MHz
9