wash-hand basin.
- In the event of a wall mounting, the height
from the floor must be a minimum of 1.50m.
Disassembly of the Wall-mounted
- Unhook the appliance from the adjustable
foot. To do so, press the two catches which
support the swivel pins of the adjustable
foot.
- Using a screwdriver, remove the screws
until the adjustable foot can be unhooked
from the wall. -
- Place the adjustable foot in the wall
and screw it into the plugs (screws not
included).
- Fit the appliance body into the two
catches which support the swivel pins of the
adjustable foot.
Cleaning
- Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Never submerge the appliance in water
or any other liquid or place it under running
water.
- Remark: When the appliance is used as a
heater after long periods in storage or after
having been used solely as a fan a small
amount of smoke may be produced. This is
Manual CA 2400 Jan 2010.indd 13
Manual CA 2400 Jan 2010.indd 13
not important and is due to the heater burn-
ing dust deposits which have accumulated
on the heating element. This phenomenon
may be avoided by cleaning the inside of the
appliance beforehand through the grill with a
vacuum cleaner or pressurised air.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems arise.
Do not try to dismantle or repair without
assistance, as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced and you
should proceed as you would in the case
of damage.
Ecology and recyclability of the product
- The materials of which the packaging of
this appliance consists are included in a
collection, classification and recycling sys-
tem. Should you wish to dispose of them,
use the appropriate public recycling bins for
each type of material.
- The product does not contain concentra-
tions of substances that could be consid-
ered harmful to the environment.
- This symbol means
that in case you wish to
dispose of the product
once its working life has
ended; take it to an
authorised waste agent
for the selective collection of Waste from
04.02.10 16:35:46
04.02.10 16:35:46