OBJ_BUCH-1208-001.book Page 19 Tuesday, June 1, 2010 2:23 PM
Additional Safety and Working Instructions
Dusts from materials such as lead-containing coatings, some wood
types, minerals and metal can be harmful to one's health and cause
allergic reactions, lead to respiratory infections and/or cancer. Ma-
terials containing asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to
be worked.
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
The battery is supplied partially charged. To ensure full battery ca-
pacity, completely charge the battery in the battery charger before
using for the first time.
Read the operating instructions of the battery charger.
Apply the power tool to the screw only when it is switched off. Ro-
tating tool inserts can slip off.
Hold the machine with a firm grip. High reaction torque can briefly
occur when switching gears. A noise can appear when switching
gears.
Symbols
The following symbols are important for reading and understanding the
operating instructions. Please take note of the symbols and their mean-
ing. The correct interpretation of the symbols will help you to use the
machine in a better and safer manner.
Symbol
Meaning
GSR Mx2Drive: Cordless Drill/Driver
Grey-marked area: Handle (insulated gripping surface)
Bosch Power Tools
English | 19
2 609 140 750 | (1.6.10)