HAFENBANDE Ally Manual De Instrucciones página 8

At a glance (included in your package)
6
5
Check scope of supply
1. Unpack the heating pad and check it and other
parts for any transport damage. Do not use the
heating pad if it shows signs of damage. Please
contact your dealer.
2. Check that the delivery is complete.
3. Remove all packing material.
Use
Connection
1. Place the completely unfolded heating pad on a
level surface.
2. Fully unwind the power cord.
3. Connect the power cord to the heating pad as
described in the "At a glance (included in your
package)" section.
4. Plug the mains adaptor into a socket.
5. Press on/off to switch on the
heating pad.
The LED lamp lights up.
6. Use the other switch to select the
desired temperature level from
H (maximum temperature),
M (medium temperature) or
L (lowest temperature).
7. To switch off, press on/off again.
The LED lamp goes off.
8
1
Notes on using
‚ The heating pad has an automatic shut-off
function. The heating pad shuts off automatically
after approx. 90 minutes.
‚ For quick heating, first select a high level and then
select a low level.
‚ If the heating pad gets wet or damp during use,
remove the cover and allow sufficient time for the
cover to air dry completely. Make sure you follow
the instructions under "Cleaning".
‚ Never use the heating pad without the cover.
‚ Do not cover the heating pad with a blanket or the
like. The animal should lie directly on the cover of
the heating pad.
‚ The heating pad should be placed on a level
surface. The heating pad can be placed directly on
the floor or on a blanket. A firm and well-insulating
underlay is recommended for cold surfaces
(e.g. stone floor). This prevents long heating times
and heat losses.
‚ When deploying the heating pad, make sure that
your pet can also sleep outside of it.
‚ The heating pad should be positioned in such a
way that prevents animal contact with the power
cord.
2
1 Control unit
2 Power cord
4
3 Mains adaptor
4 Heating pad with cover
5 Connector
6 Zip fastener
3