Publicidad
Idiomas disponibles
Idiomas disponibles
ICE trays.
GB
The Easy Ice trays are set into the top part of the
freezer drawers to maximise the space within the
freezer. The trays are drip-free and sealed to prevent
food from tainting the ice cubes.
1. Check that the tray is completely empty and fill it
with water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice
cubes from dispensing (if this happens, wait for the
ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected
compartments each mould fills with water ( see
diagram ).
4. Close the opening with the lid provided and put the
tray back, placing the top part in the corresponding
housing and allowing it to drop in again.
5. When the ice has formed (minimum time
approximately 8 hours) knock the tray against a hard
surface and wet the outside so that the ice cubes
come loose and take them out through the opening.
20
suitable cookware to be cooled quickly inside the
freezer compartment.
! Use the supplied cookware (this should be stored at
room temperature).
! After placing the food in the cookware container,
close it using the lid provided and make sure the seal
is airtight.
! Carefully position the cookware on the rack provided
and place it in the FREEZER and STORAGE
compartment.
There are two operating modes available:
- CHILLING CARE 30
- CHILLING CARE 70
and enables rapid cooling of dishes such as
vegetables, desserts, fish salad and meats weighing
less than 500 g (meat salads).
To select the function, press the MODE button as
many times as is necessary to make the CHILLING
CARE symbol flash, then press the SELECT button to
activate the function.
The status of the function is 'active' when the
corresponding icon on the display flashes.
After 30 minutes a buzzer will sound to indicate that
the function is complete.
To exit this alarm status, press the SELECT button;
MAX
after doing so the icon will be displayed in a normal
WATER LEVEL
manner.
minutes and enables rapid cooling of dishes such as
meats weighing more than 500 g (short loin steaks,
meatloaf, roast meats).
To select the function, press the MODE button as many
times as is necessary to make the CHILLING CARE
symbol flash, then press and hold the SELECT button
for more than 3 seconds to activate the function.
The status of the function is 'active' when the
corresponding icon on the display is lit in a fixed manner.
After 70 minutes a buzzer will sound to indicate that the
function is complete.
To exit this alarm status, press the SELECT button; after
doing so the icon will be displayed in a normal manner.
! Once the CHILLING CARE function has been
deactivated, the cookware should be removed from
the freezer compartment and the food may either be
consumed or placed in the refrigerator compartment
for storage purposes.
enables hot dishes contained in
The function lasts thirty minutes
The function lasts seventy
Publicidad
