Changing The Battery Pack Fig. [2A] + [2B]; Settings; Changing Direction Of Rotation [1-8]; Changing Gear [1-4] - Festool C 18 Li Manual De Instrucciones

Changing the battery pack Fig. [2A] + [2B]

 Battery pack is ready for use immediately upon
delivery and can be charged at any time.
2A
Inserting battery pack
click
Consider the pictures on the fold-out page.
CAUTION
Risk of injury

Always switch off the power tool before adjusting

settings!

Changing direction of rotation [1-8]

• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation

Changing gear [1-4]

• Gear switch forwards (digit 1 visible) = 1st gear
• Gear switch to rear (digit 2 visible) = 2nd gear
2B
Removing battery pack
The capacity display [1-10] automatically displays
the charge state of the battery pack [1-9] when the
BP/C 18
ON/OFF switch is actuated:
(not NiCd- and NiMH-battery packs)
Settings
Adjust the switch so that its marking [1-7] faces the
screw symbol [1-6].
Adjust the torque accordingly at the torque wheel
[1-1].
Position 1 = low torque
Position 25 = high torque
An acoustic signal sounds when the preset torque
is reached and the machine then switches off. You
must release and press the ON/OFF switch [1-9]
again to start the machine.
2
70 - 100 %
40 - 70 %
15 - 40 %
< 15 %
Recommendation: Charge bat-
tery pack before further use.

Fastening

1
11