Glacier bay HD65601-5101 Guía De Uso Y Mantenimiento página 6

Installation (continued)
7
Installing the handle
□
Thread the handle (K) onto the ange (L).
□
Place the other handle onto the left (hot) valve
and install the same way.
NOTE: After install handle assembly, if the handle seat is
not aligned with handle in a line as shown in the above
diagram (1), rotate the handle seat back (the ratating angle
can not exceed 90°) to make the handle seat align with
handle in a line.
9
Making the water supply
connections
□
Connect the water supply lines (1) to the
faucet inlets (2). (Supply lines are not
included.)
1
K
L
8
Connecting the hoses
□
Connect the hoses (R) to the bottom of the hot
and cold end valves (M & N), as shown.
□
Align the middle body (G) in a position that will
allow maximum clearance to connect the
hoses (R).
□
Carefully bend the hoses (R) to t in the
available space, and carefully thread the hose
(R) couplings onto the sides of the middle
body (G). Tighten all connections with a wrench.
M
R
2
1
6
G
N
R