Publicidad
Idiomas disponibles
Idiomas disponibles
Stays on green: The receiver and microphone B are successfully
connected.
Battery indicator 2
Red and green lights: Power on and charge. (It is not recommend-
ed to power on and charge.)
Stays on red: Power off and charge. When the receiver is fully
charged, the red light turns off.
Stays on green: The receiver is power on. The receiver is fully
charged.
Turn off: The receiver is power off.
TROUBLESHOOTING
No sound for TW310 (The batteries of microphone have already
been installed, but the signal light still turns off.)
Wireless Microphone ID Pairing Steps:
1. Make sure that the receiver and microphone are turned OFF.
2. Unscrew the microphone tail tube and install the batteries into
the mic's battery compartment.
3. Turn on the microphone, and press setting button 5 (on the
microphone), until the microphone screen flashes quickly, then
release setting buttons.
4. Turn on the receiver's power button, waiting for red signal light
flashing 4 times, then press the setting button 5 (on the
microphone) once. The microphone screen becomes steady and no
longer flashes, the signal light on the receiver turns steady,
indicating that the pairing is successful.
5. Tighten the microphone tail tube. Pairing is now completed.
No sound for TW320 (The batteries of microphone have already
been installed, but one of the microphone has on sound.)
Wireless Microphone ID Pairing Steps:
1. Make sure that the receiver and microphone are turned OFF.
2. Unscrew the microphone tail tube and install the batteries into
the mic's battery compartment.
3. Turn on the microphone, and press setting button 5 (on the
microphone), until the microphone screen flashes quickly, then
release setting buttons.
4. Turn on the receiver's power button, waiting for signal light
06
Publicidad
