GB | LED Work Light
Quick Switch-off Function
This function will make switching off a Work Light with multiple lighting
modes much easier. Simply use whichever lighting mode you need and then
turn off the Work Light when you're done with a single button press – no
need to go through all the remaining lighting modes to turn the Work Light
off.
1. Turn on the Work Light.
2. Choose the lighting mode that suits you best.
3. The quick switch-off function automatically activates if the Work Light remains in
the same lighting mode for 10 seconds.
4. Afterwards, another press of the button automatically turns the Work Light off
(skips the other lighting modes).
Rechargeable Battery Protection
A product with this function features protective circuits that prevent both
overcharging and excessive discharging of the accumulator that could lead
to high temperatures, sparking or explosion that would irreversibly damage
or destroy the product.
Charging the Accumulator
The accumulator must be charged before first use. The accumulator self-discharges
and must therefore be recharged at least once every 3 months to prevent its voltage
from dropping and the accumulator potentially being rendered unusable.
While charging, the LED on the front of the work light glows red. Once the accumulator
is fully charged, the LED glows green.
Attention
• When new, the Work Light must first be charged before use.
• Use only with the power source supplied with the product. (SD-G0501000D)
• The Work Light's accumulator must be kept charged to prevent the voltage from
dropping below the threshold level. Therefore, it is recommended to recharge the
Work Light at least once every 3 months even when it is not being used. Temperature
for lamp charging +5 °C to +45 °C.
• If the Work Light does not light up or the light is weak, recharge it immediately.
• If the accumulator is damaged or destroyed due to non-observance of the above
rules, complaints filed within the warranty period regarding the Work Light (accu-
mulator) will not be accepted.
• Recharge the Work Light in dry indoor areas.
• Do not throw the Work Light or the accumulator into a fire and do not disassemble
or short-circuit it.
• This device is not intended for use by children or persons whose physical, sensory
or mental disability or lack of experience and expertise prevents safe use, unless
they are supervised by a person responsible for their safety.
• Keep the Work Light out of reach of children.
2