BEAUTIFLY Golden Serie Manual Del Usuario página 9

EN
can enjoy professional skin renewal treatments in the comfort of your own
home. Intenso Aura Age Defy Golden allows you to care for your skin on a daily
basis without having to visit beauty salons.
- Long-lasting Results: Let your skin radiate beauty for years to come. Intenso
Aura Age Defy Golden not only delivers immediate results, but also stimulates
natural renewal processes to make the effects long-lasting and impressive.
Indications
1. Start-up
- Press the ON/OFF button to switch the device on.
- The device will emit 1 beep and start.
2. Operation modes
- DMA+RF mode (L): Remove the cover and press the ON/OFF button for 1s,
after 1 beep the unit will start vibrating with a red LED light. The white indicator
will light up.
- DMA+RF(H) mode: Press the ON/OFF button to switch the mode, the orange
indicator will light up. The unit will start vibrating with RF and a red LED light.
- RF(L) mode: Press the ON/OFF button to toggle the mode, the white indicator
will light up. The device will start intermittent vibration with RF and a golden light.
- RF mode (H): Press the ON/OFF button to toggle the mode, the orange
indicator will light up. The device will start continuous vibration with RF and
golden light.
- DMA (L): Press the ON/OFF button to toggle the mode, the white indicator will
light up. The 3D diamond roller works with the DMA function.
- DMA (H): Press the ON/OFF button to toggle the mode, the orange indicator
lights up. The 3D diamond roller is operating with the DMA function.
3. Switching off - press the ON/OF button for a few seconds and the unit will
switch off after beeping once.
4. Power indicator
- The unit will beep twice and the white power indicator will flash when the
charge level drops below 10%. It can only be used once in any mode.
- The white indicator flashes twice and emits 2 beeps when the unit is not
powered. The unit cannot start operation.
- The white indicator flashes while charging.
- The white indicator lights up when the unit is fully charged and goes out when
the power supply is disconnected.
5. Charging - the white indicator flashes.
6. Fully charged - white indicator lights up.
How to use:
- DMA+RF mode or RF mode [page 2 - f2]
9