Publicidad
Idiomas disponibles
Idiomas disponibles
Figure17
Figure18
Opengrass catchercover by pushinginon the rear,right-sidetab
with yourright-hand,as seenin 1 of Fig. 19,and lifting withyour
left-handin the rear center,2.
8,
Installbothgrass bins ontothe bin supportassemblybyinserting
the front edge in first (1),as seen in Fig.20, and settingthe back
edge down(2) untilit fits intothe assembly.
/
Figure 20
NOTE: The sideof the grassbins with thetight meshis intendedto be
positionedfacingforward.
g.
10.
11.
Installone of the rubberchute straps(723-04008A) ontothe
dischargechuteelbowusingone of the suppliedclevispins (711-
05063),washer(736-0204)and Bow-tiecotter pins(710-04040)
from hardwarepack689-00092B.See Fig. 21. Securetheend
of the strap utilizingthe holefurthestfrom the end,and insertthe
torsion springhook(732-04510A) f romthe same hardwarepack
into theother end of the rubberstrap.
Install t hedeck mounting pin(711-05049) and twoflatwashers(736-
0176),fromhardware pack689-00092B, up intothechuteelbowand
securewitha flangelocknut(712-3027), asseenin Fig.21.
Install t heshoulder b olt(738-0754) i ntothechuteelbowfromthetop
sideandsecureinsidethechuteelbowusinga flangelocknut(712-
04063)fromthe samehardware pack(689-00092B). See Fig.21.
Figure 19
12
Figure 21
Publicidad
