START-UP GUIDE
This section explains how to use your new walkie-talkies. It is recommended to read the
complete user guide for detailed instructions and safety warnings.
1
Take out the belt-clip from each walkie-talkie. To do so, push the belt-clip upwards
while lifting the latch.
Insert 1 x 6LR61 battery (not included) in each walkie-talkie. The battery
2
compartment is located at the back of the unit. Put back the belt-clip on each
walkie-talkie.
To turn the walkie-talkies on, move the HI/LOW/OFF switch to the "HI" or "LOW"
3
position. In "LOW" position, the volume of the walkie-talkies is low, whereas it is
high when set to the "HI" position.
Press the TALK button, and talk to the other user. Release the key to listen to
4
the other end. Note: it is recommended to use the walkie-talkies from a distance
between 1.5 and 100 metres and in a flat open area.
Press the Morse key to create light messages for your secret contact. Do not forget
5
to direct the light beam to the person you wish to send a message to. Please refer
to the Morse code table on page 2 to compose your light messages. Short press the
Morse key to make a dot (.) and long press the same key to make a dash (-).
INSIDE THE PACKAGE
2 Walkie-Talkies with belt clip
One instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not
part of this toy and should be discarded for your child's safety.
6