Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove the appliance and the individual parts from the packaging.
Note: Before using your convection heater for the rst time, you must assemble the two supplied feet.
2. Place the convector on a at, level surface.
3. Turn the appliance upside down.
4. Place and secure each leg with the screws provided (an
installation wrench is provided for this purpose) on each
side of the appliance.
5. Turn the appliance right side up.
6. Your appliance is stable and ready for use.
Notes:
•
You should never use your convection heater if the
legs have not been assembled.
•
Unplug the appliance from the mains after each use.
using the appliance
First-time use
When use for the rst time, your appliance may emit a slight odor. This is normal. Therefore, allow for
suf cient ventilation. This smell is temporary and will fade quickly.
Power levels
The power levels are indicated by the symbols "I" and "II".
•
To set the output power to 1,250 W, put the selector switch on the "I" symbol.
•
To set the output power to 2,000 W, put the selector switch on the "II" symbol.
•
To set the output power to 1,250 W with turbo function, put the selector switch
on the "I " symbol.
To set the output power to 2,000 W with turbo function, put the selector switch
•
on the "II " symbol.
•
To switch off the mobile convection heater, set the selector switch to the "0"
symbol.
Setting the thermosta t
Minimum safety temperature.
Maximum temperature.
•
The temperature can be adjusted with the thermostat.
•
Turn the thermostat knob to the maximum temperature <
24
V.1.0
Modo de empleo
I I
>.
0
I
MAX
Publicidad
