CASO DESIGN L 15 Manual Del Usuario página 7

Next put the food into the container on the scale. The weight of the food only will appear
on the display. Remove the food and the container and the scale will show the negative
weight. Press the
If weight of container is not cleared, you have to deactivate the HOLD-function first by
pressing button until „H-OFF" is displayed. Then start using tare function again.
4.4.3 HOLD-Function
displayed. Put the food on the scale surface and weight of food will be shown. A beep will
sound and the weight will be locked. The weight will be shown even if you remove the
food from the scale. You can delete the saved weight, with:
- Press button
4.4.4 Changing from grams to ounces
Press to change between g, kg, lb: oz and oz.
4.4.5 Switching off
The scale turns off when you press
Without any operation the scale will automatically turn off after 60 seconds.
4.4.6 Over Load Indicator
When the scale is overloaded the display will show the error code "EEEE"
button and the LED shows zero again.
- Place next food on the scale (with weight of at least 5 g)
for more than 2 seconds.
Use the HOLD-Function when you
want to weigh larger quantities that
could cover the display.
To activate HOLD-Function press
until "H-ON" will be
7