Publicidad
Idiomas disponibles
Idiomas disponibles
_
ARNING:
TO AVOID SERIOUS
iNJURY, BEFORE PERFORMING
ANY SERVICE OR
ADJUSTMENTS:
1.
Depress
clutch/brake
pedal fully and set parking
brake.
2.
Place
gearshift
lever
in neutral
position.
3.
Place
attachment
clutch
in "DISENGAGED"
position.
4.
Turn ignition
key to "STOP"
and remove
key.
5.
Make
sure the blades
and all moving
parts have
completely
stopped.
6.
Disconnect
spark
plug wire from spark
plug and place wire where
it cannot
come
in contact
with plug.
TO REMOVE MOWER
TO INSTALL MOWER
Mower
will be easier
to remove
from the
right side of tractor,
1.
Place
attachment
clutch
in "DISEN-
GAGED"
position.
2.
Move attachment
lift lever forward
to
lower
mower
to its lowest
position.
3.
Roll belt off engine
pulley.
4.
Remove
small
retainer
spring,
and
remove
clutch
spring
off pulley
bolt.
5.
Remove
large retainer
spring,
slide
collar
off and push housing
guide out
of bracket.
6.
Disconnect
anti-sway
bar from chassis
bracket
by removing
retainer
spring.
7.
Disconnect
suspension
arms from rear
deck brackets
by removing
retainer
springs.
8.
Disconnect
front links from deck by
removing
retainer
springs.
9.
Raise
lift lever to raise suspension
arms.
Slide mower
out from under
trac-
tor.
IMPORTANT:
If an attachment
other than
the mower
deck is to be mounted
on the
tractor,
remove
the front
links and hook
1. Raise attachment
lift lever to its highest
position.
2. Slide mower under tractor with deflec-
tor shield to right side of tractor.
3. Lower lift lever to its lowest position.
4. Connect front links to mower deck and
secure with retainer springs.
5. Connect suspension
arms to rear deck
brackets and secure with retainer
springs.
6. Connect anti-sway
bar to chassis
bracket and secure with retainer
spring.
7. Push clutch cable housing guide into
bracket, slide collar onto guide and
secure with large retainer spring.
8. Place flat washer and clutch spring on
idler pulley bolt and secure with small
retainer spring.
9. Install belt onto engine pulley.
the clutch
spring
Into square
hole in frame.
Small Retainer S
Clutch Spring
Clutch
Engine
Pulley
Retainer
S
Anti-Sway
Bar
Springs
(Both Sides)
Deflector
Housing
Guide
Large Retainer
Spring
Bracket
21
Publicidad
