CLEANING YOUR AUTOMATIC ESPRESSO,
CAPPUCCINO, AND LATTE MAKER
CLEANING THE MILK RESERVOIR AND FROTHING TUBE
Although you can store the milk reservoir with leftover milk in the refrigerator, it is important to
clean the reservoir and frothing tube regularly to avoid clogging and residue build-up. In order to
clean the milk reservoir, please follow the instructions listed below:
1.
Remove the milk reservoir from the unit by lifting up on the milk reservoir release button
and simultaneously sliding milk reservoir out, grabbing milk reservoir by lid.
2.
Remove the lid of the reservoir.
3.
Dispose of any milk left, then rinse and wash the milk reservoir and its lid thoroughly with
warm soapy water. Make sure to rinse and dry them well. Do not use abrasive cleaners
and scouring pads, as they will scratch the finish.
NOTE: The milk reservoir is also dishwasher safe (top rack). Do not place the lid of the
milk reservoir in the dishwasher.
4.
Place milk reservoir back onto unit, lifting up on reservoir release button and
simultaneously sliding milk reservoir in, holding reservoir by the lid.
5.
Place a large empty cup under the froth dispensing tube.
6.
Turn the Froth Control Knob counter clockwise to the clean position "
the Clean "
" button to activate the clean function. The unit will start releasing steam
through the froth dispensing tube. Let the cleaning cycle run until you no longer see any
milk coming out of the tube, or let the cycle run until it stops automatically.
7.
Dispose of any water left in the milk reservoir and place it back in the unit. You should feel
the milk reservoir lock in place.
CLEANING THE FILTERS
1.
To remove the detachable bottom covers from under the filters, rotate them
counterclockwise towards the unlock icon "
2.
Wash the detachable bottom covers and filters with warm soapy water. Make sure to
rinse and dry them well.
3. Place the detachable bottom covers back onto the filters by inserting them in their place
and then rotating them clockwise (away from the unlock icon "
CLEANING THE BREW HEAD, THE PORTA-FILTER AND FILTERS
1.
Press the on/off "I/O" switch located on the right side of the unit to the off position "O" and
unplug the power cord from the electrical outlet.
2.
Some of the metal parts may still be hot. Do not touch them with your hands until they
have cooled.
3.
Remove the porta-filter and discard the coffee grounds, used pod or used OriginalLine
Nespresso
* capsule. Wash both the porta-filter and filter thoroughly with warm soapy
®
water. Make sure to rinse and dry them well.
NOTE: Do not wash the porta-filters and filters in the dishwasher.
4.
Wipe the lower part of the brew head in the unit with a damp cloth or paper towel to remove
any coffee grounds that might have been left.
5.
Place the porta-filter (without any filter) back in the brew head in the unit and lock it in place.
6.
Place a large empty cup under the porta-filter.
7.
Plug the power cord into the electrical outlet. Press the on/off "I/O" switch to the
on position "I".
8.
Press the Espresso " " button once and let the unit brew with water until it stops
automatically.
".
E n g li s h - 13
" then press
") until you hear it click.