Chacon IPCAM-FI01 Manual De Uso página 5

Note3: This camera only supports 2.4GHZ WIFI network. Before adding equipment,
please ensure that your router supports 2.4GHZ WIFI network, and the mobile
phone is connected to 2.4GHZ WIFI network.
3. Add the camera to the application by clicking to the "+", choose the device to add
and the select the way to proceed (Scan QR code or smart configuration). Then
follow the instructions.
Note1: Make sure that the smartphone is well connected to the right Wi-Fi
network. When you have to register the SSID, make sure you put the same Wi-Fi
network and the right password.
Note2: If the device fails to be added, press and hold the reset button on the device
to restore the device to the factory settings. After the device indicator flashes red
slowly and you hear a "beep", try again to add the camera to the application.
Note3: A camera can only be added to one account. If the camera has been already
added, it cannot be added on another account.
3. USE
A: Camera interface
B: Motion detection alarm pictures
C: Personal Homepage
D: Add device
5