BabyOno GET READY! ANATOMY MED Manual Del Usuario página 3

PRODUCT PARAMETER INFORMATION
product description
model
vacuum (approx.)
breastshield size
unit weight
unit dimensions
temp.
operating environment
humidity
pressure
temp.
storage environment
humidity
INSTALLATION INSTRUCTIONS
Note: Make sure you have cleaned and optionally
disinfected the appropriate parts of the breast pump.
After cleaning, follow these steps to assemble your
collection units:
Step 1: Insert the breastshield into the funnel-shaped
section of the pump body. Two breastshield sizes are
available: 24mm and 27mm. You can find the size on
the breastshield itself.
Step 2: Please install the white membrane on valve
smoothly. Make sure the white membrane won't curl up.
manual breast pump
LD-101
approx. -250 mmHg
24 mm
approx. 159 g (5.61oz)
205 x 186 x 90 mm (L x W x H)
5 C ~ 40 C (41 F~104
o o o o
15~93%RH
700hPa~1060hPa
-20 C~55 C (-4 F~131
o o o
≤93%RH
F)
F)
o
Step 3: Insert the valve into the pump body from
underneath. Push the valve in as far as possible.
Step 4: Screw the pump body clockwise onto the bottle
until it is securely fixed.
Step 5: Insert the stem into the hole of the elastic
diaghragm. Push the stem in as far as possible. Place
the diaphragm with stem into the seal seat, make sure
the diaghragm edge and seal seat edge close fitting.
If there's no "O" shaped sealing ring on the plug at the
bottom of the sealing seat, please put in on.
3