Levenhuk ERMENRICH Tunn PD20 Guia Del Usuario página 4

Screwdriver Bits
PH000, PH00, PH0, PH1, PH2
SL1.5, SL2.0, SL3.0, SL4.0
T2, T3, T4
T5H, T6H, T8H, T10H, T15H
P2 (Pentalobe 0.8), P5 (Pentalobe 1.2)
H1.5, H2.0
2.3 U2.6
Specifications
Magnetic bits
Rotation
Rotation speed
Operating humidity range
Operating temperature range
Storage temperature range
Electric torque
Manual torque
Auto-off
Power supply
USB slot for battery charging
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Use the device only as specified in the user manual. Do not allow the device to get wet. If using the device in an electrostatic environment,
install an electrostatic ring to demagnetize the magnetic bits to avoid accidents. In order to avoid an accidental injury, do not put the device
in your pocket or bag.
Keep away from children. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please
contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Do not use the product
in explosive environment, close to flammable materials. Store the device in a dry cool place. Only use accessories and spare parts for this
device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If
a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries
as prescribed by your country's laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty
against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk
accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles
you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions
are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
Y1
24pcs
forward, reverse
300r/min.
20...70%
-10...+50℃
-10...+50℃
0.3–0.45N⋅m
3N⋅m
2 min.
350mAh 3.7V lithium battery
Type-C
4