Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1.
Align the grooves on the rear blower tube (5) with
the tabs on the connecting tube (6).
2.
Turn the rear blower tube in the direction of the
slot until the tabs lock into position.
Put the cord in the cord retainer.
10.5
INSTALL THE FRONT BLOWER TUBE
4
1.
Align the grooves on the front blower tube (4) with
the tabs on the rear blower tube (5).
2.
Install the front blower tube onto the rear blower
tube until the tabs engage the grooves.
3.
Turn the front blower tube in the direction of the
slot until the tabs lock into position.
The front tube has two fixed positions. You can
adjust the length of the tube according to different
needs.
10.6
INSTALL THE BATTERY PACK
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1.
Align the lift ribs on the battery pack with the
grooves in the battery compartment.
WARNING
5
NOTE
WARNING
English
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
3.
When you hear a click, the battery pack is
installed.
10.7
REMOVE THE BATTERY PACK
1.
Push and hold the battery release button.
2.
Remove the battery pack from the machine.
10.8
ADJUST THE HARNESS
1.
Fit the backpack on your back.
2.
Pull the ends of the straps down to tighten the
harness.
3.
Connect the horizontal chest strap.
4.
Pull the end of the chest strap to tighten.
5.
Lift the tabs of the adjusters to loosen the straps.
10
7
1
2
Publicidad
