GE KTC-511P Manual De Instrucciones página 5

To set up the camera, see Figure 2 and perform the following:
Note:
For back focus instructions, see section 3, Additional Adjustments.
DIP switch
Lens
mode
switch
Figure 2. Camera controls
1)
If you are using a C-mount lens, screw on the C-mount adapter.
2)
Screw the appropriate lens to the camera.
3)
Set the lens mode switch (Figure 3) to
correspond with the lens:
• For an auto iris lens without amplifier
(DC type), set the lens mode switch to
DD.
• For an auto iris lens with built-in
amplifier (VIDEO type), set the lens
mode switch to VD.
• For a manual iris lens, set the lens
mode switch to AES.
4)
If you are using an auto iris lens, insert
the iris lens plug into the auto iris lens
connector. (See Figure 1.)
Phase adjust
buttons DD level
Installation Instructions
Figure 3. Lens mode switch settings
AES—manual iris lens
VD—video drive lens
DD—DC drive lens
5