Singercon CON.LED-110 Manual De Instrucciones página 17

Settings available in the menu:
ADDR A001-A512
CHND 7CH
15CH
SLND SLAV
MAST
Soun
SHND Sh1 --- sh24
SPED
SOUD ON, OFF
SOEN 0-100
TEST YES
dISP NO
YES
LED OFF
NO
1TIL NO
YES
2TIL NO
YES
DEFT YES
To select a built-in effect (Shnd) and set its speed, follow these steps:
1) Select the Shnd menu item, then press the ENTER button .
2) Use the UP and DOWN buttons to select the desired effect from 01 to 24 , then press the ENTER
button .
3) Select the Shnd menu item again, then press the ENTER button .
4) Use the UP and DOWN buttons until the display shows SPed , then press the ENTER button .
5) Use the UP and DOWN buttons to set the speed to a value between 01 and 08 , then press the
ENTER button .
DMX channel functions
7-channel DMX mode
Channel Function
1 Motor route 1
EN
Address setting
7-channel option
15-channel option
"SLAVE" option
"MASTER" option
Sound control
Auto mode programs sh1-sh24
Program speed - slow-fast (01-08)
Enable/disable sound control
Microphone sensitivity in sound mode (0 - low, 100 - high)
Automatic test
Normal display position
Reverse display position
LED backlighting - on
LED backlighting - off
Default Y1 motor movements
Inverted Y1 motor movements
Default Y2 motor movements
Inverted Y2 motor movements
Restore factory settings
Value of the
0-255 0°---135°
Instructions