Publicidad
Idiomas disponibles
Idiomas disponibles
This symbol means that the device should
not be used near bathtubs showers, sinks
or other water containers.
This device is designed for use at a maximum alti-
tude up to 2000m above sea level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or in-
dustrial use under any circumstances. Prior to plugging in the product, check that your
mains voltage is the same as the one indicated on the product label. Do not use the device
on wet hair. Do not use the device or connect and disconnect to the supply mains with the
hands and/or feet wet. Do not use any accessories other than those supplied. The mains
connection cable must not be tangled or wrapped around the product during use.
Do not pull on the connection cord in order to unplug it. Proceed according to the conser-
vation and cleaning section of this manual for cleaning. Do not use the product on animals.
Always handle the straightener around the body (B) during use of the same. handle Unplug
the product immediately from the mains in the event of any breakdown or damage and
contact an official technical support service. In order to prevent any risk of danger, do not
open the device. Only qualified technical personnel from the brand´s Official technical su-
pport service may carry out repairs or procedures on the device. Any incorrect use or im-
proper handling of the product shall render the warranty null and void. Only an authorized
technical support service center may carry out repairs on this product. Connect the device
to a mains supply with a 0,5 Ohm maximum impedance.
B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
1. Plug the mains plug into a compatible socket. The appliance shall remain in "stand by"
with the digital screen (D) off and without heat emission.
2. Press the on/off button (E) to switch the appliance on. The default operating tempe-
rature is set to 150°C, and the '150' LED will light up. The appliance will start to heat up
immediately.
3. Five temperature options (150/170/190/210/230°C) are available. Press the temperature
control button (F) repeatedly to set the desired temperature. The LED light flashes before the
selected temperature is reached and turns it to a solid light after the temperature is reached.
4. To lock the temperature while operating the appliance, double click the temperature
lock button (G), the 'LOCK' LED lights up immediately and the button is deactivated. To un-
lock the temperature, double click the button (G) again. The 'LOCK' LED lights off, and the
button is activated.
5. To switch off the appliance, long press the on/off button (E) for 3 seconds until the LED
light off.
6. After use, switch off the appliance and unplug it. Allow the appliance to cool completely,
then store it away.
10
Publicidad
