CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Clean the rollator regularly with warm water and a soft cloth. Do not use abrasive products,
detergents or solvents.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
•
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and
polyamide materials.
•
Lubricate the wheels with a little oil if they squeak.
•
Periodically check the wear and strength of all screws and bolts. Replace all broken, damaged or worn
parts immediately.
•
Check that the brakes are working before each use.
•
If there is a malfunction, do not repair the rollator yourself. Consult an authorized dealer.
•
Checklist :
To keep the rollator in good condition, check before each use, and check regularly as follows :
Check the item
Clip and knob for height adjustment
Structural weld at wheels
Cleanliness
Screws and fasteners
Stability of frame and backrest
Condition of seat
Brakes
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions.
When transferring the rollator, remember to hand over all the necessary technical documents to the new
user. Beforehand, the product must be inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer.
If you wish to carry out recycling for yourself, ask your local waste management company for disposal
guidelines.
STORAGE
Failure to observe the storage conditions may lead to deterioration of the product and thus to the
risk of serious injury.
Do not store your rollator for an extended period of time near a heat source or in the sun (e.g. behind a
window or near a radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Observe the conditions for storing and stowing your rollators.
•
In a dry and temperate place
•
Protect your rollator by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water,
salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them
with other products when reassembling.
Version Septembre 2023
Anytime
Weekly
X
X
X
X
X
Monthly
Yearly
X
X
Page 8 sur 13