Grundig ST 6150 L Manual Del Usuario página 33

TROUBLESHOOTİNG_ ______________
Problem
The steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
The steamer is producing a loud
humming or pumping sound
The steamer does not seem to be
removing creases easily
Unsure when to use the brush
Avoiding discoloring of metal
accessories on the garment
Possible_solution
• Check main plug is inserted correctly.
• Check power supply.
• Check power button.
• Check the water level and the water
tank inlet cover is properly covered.
• Press the steam activation button
harder.
• Hold the steamer in an upright posi-
tion.
• Make sure water is not over the MAXI-
MUM level.
• Make sure water tank inlet cover is
properly closed.
• Check water level; if there is no water
or it is low , refill the water tank.
• Hold the steamer in an upright posi-
tion and stretch the fabric downward
to ensure best results.
• Use fabric brush on not delicate fab-
rics for better results.
• Do not directly hover the garment
steamer over the metal accessories.
• Use caution and steam around the
metal accessories.
33
ENGLISH