Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING FUNCTION
The appliance will automatically remind you when it is time to descale. The associated indicator light will
start to flash, in order to indicate that the appliance needs to be descaled. Descale the appliance regularly
in order to extend its lifespan and to ensure it continues to work properly. In order to do this, follow the
instructions below:
1.
Hold the iron over a sink.
2.
Fill the water tank up to the maximum indication with a mixture of 1/3 vinegar and 2/3 water.
3.
Insert the plug into the power socket, turn on the unit with the on/off button and turn the
temperature dial to any position.
4.
Press and hold the cleaning button for a few seconds. The appliance will produce an audio signal and
the indicator light will flash during the descaling procedure.
5.
The pump will allow water to flow through the iron, cleaning it itself. This will take about two
minutes.
ATTENTION: do not come into contact with the hot steam otherwise you run the risk of severe
burning!
6.
When the descaling procedure is completed, the audio signal will stop and the cleaning light will
stop flashing. Turn off the appliance using the on/off button.
7.
Pull the plug out of the power socket. Wipe the appliance clean with a damp cloth and return the
iron to the base.
PROBLEM AND SOLUTION
PROBLEM
Water droplets emerge from the ironing soleplate. ·
Brown water comes out of the soleplate.
www.domo-elektro.be
SOLUTION
Turn the temperature dial within the margins
of the steam symbol.
·
Do not use perfumed or scented water in the
water tank. Use tap water only (or 50% tap
water and 50% demineralised water in case of
hard water).
·
Carry out the cleaning procedure.
37
DO7118S
Publicidad
