Pacific hydrostar 69488 Guia De Inicio Rapido página 2

Don't forget the following steps when using your
STOP
Electric Pressure Washer.
BEFORE EACH USE
Power Reset
CAUTION! To prevent damage to the couplers:
Indicator
Light
PRESS RESET (light turns on)
Test GFCI plug before use.
See manual instructions.
Water Hose
WHEN MOVING UNIT
DO NOT CARRY UNSUPPORTED!
Do not carry the pressure washer
without supporting the water hose.
DO NOT DRAG BY HOSES
OR PRESSURE WASHER
WILL BE DAMAGED.
Spray Gun
Hose
STARTING PROCEDURE
1. CONNECT WATER HOSE
2. TURN ON WATER
AND PRESSURE HOSE
O N
5. TURN POWER ON
4. SQUEEZE THEN RELEASE
AFTER PURGING AIR
TRIGGER TO PURGE AIR
CAUTION
DO NOT RUN UNIT WITHOUT WATER!
Reset
3. PLUG INTO OUTLET
AND PRESS RESET
6. SQUEEZE TRIGGER TO SPRAY