Utilitech NTH15-18ARD Manual Del Usuario página 8

Setting the temperature
1. To set the temperature, press the increase (E) or
decrease button (D).The temperature indicator
flashes and then it will stop flashing once the
temperature is set.
2. When the room reaches the set temperature, its
indicator flashes for 10 seconds and then it will
stop flashing.The product enters the standby mode.
3. When the room temperature decreases, the
product switches on again automatically.
NOTICE: You can also press and hold the increase
(E) or decrease button (D) to quickly set the
temperature. The temperature can be set between
40 °F - 95 °F (5 °C -35 °C).
Setting the timer (automatic switch off)
1. When the product is switched on, press the timer
button (I). The h starts flashing.
2. Press the increase (E) or decrease button (D) to
set the timer.
3. After 5 seconds the set time stops flashing. The
time indicator lights up.
4. The product switches off automatically after the
set time.
Setting the timer (automatic switch on)
1. When the product is switched off, press the timer
button (I). The h starts flashing.
2. Press the increase (E) or decrease button (D) to
set the timer.
3. After 5 seconds the set time stops flashing. The
time indicator lights up.
4. The product switches on automatically after the
set time.
All manuals and user guides at all-guidesbox.com
8