XJD KF-T02 Manual De Instrucciones página 4

The main bike frame installation is completed.
2
(1) First, install the footrest fixture(C1) in Figure ① into the front fork(C) assembly in
the direction of the arrow.
(2) As shown in the large picture, pass the front fork(C) assembly through the frame
head tube in the direction of the arrow.
(3) Insert the handlebar (B) into the stand tube of the front fork assembly (C) following
the arrow. Mind to align with the notch and hole of the stand tube, and then fit through
the screw and tighten with the Allen key (E);
(4) Finally, Use the Allen key (E) to loosen the seat tube clamping head of the
mainframe (A). Insert the saddle (D) into the seat tube of the mainframe (A) along the
direction of the arrow. Please keep in mind to insert it deeper than the safety mark.
Use the Allen key (E) to lock up the saddle clamping head to ensure that the clamping
head does not rotate.