Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING THE BABY UNIT ON ALL (OPTIONAL)
Items to purchase
You will need to purchase the following items separately to mount your
baby unit:
2 screws
2 anchors
NOTE
• The types of screws and anchors you need depend on the wall
composition.
1.
2.
18
NOTE
• Check the reception strength
and camera angle before drilling
the holes.
Use a pencil to mark two parallel
holes. Make sure they are equally
distant as the wall mount holes on
the baby unit.
Drill two holes in the wall. If you
drill the holes into a stud, go to
step 3.
-OR-
If you drill the holes into an object
other than a stud, insert the wall
anchors into the holes. Tap gently
on the ends with a hammer until
the wall anchors are flush with the
wall.
3.
4.
5.
Video Baby Monitor | Vigilabebés
Intercomunicador de vídeo para bebé
Insert the screws into the holes
and tighten the screws until only
1/4 inch of the screws are exposed.
Align the wall mount holes on the
baby unit with the screws on the
wall. Slide the baby unit down until
it locks into place.
Adjust the camera angle.
EN
19
Publicidad
