König Electronic HC-SH11 Manual De Uso página 2

Features of LED shower head
• Material: ABS, electro-plated
• Ambient temperature: 0-60°C
• Ambient humidity: 10-90%
• Minimum water pressure: 0.2-0.6MPA
Colour change
The colours of the LEDs change randomly.
LED quantity
12 (HC-SH11) or 8 (HC-SH8) high brightness LEDs with a diameter of 5mm.
Instructions for use
Open the tap after the LED showerhead is installed, the power generation device inside the LED showerhead
will be driven and turn on the LEDs when the water pressure reaches 0.2MPA.
LED Showerhead installation
Step 1: Attach the LED showerhead to the hose that connects with the water pipe;
Step 2: Open the tap completely; the LED shower will work well.
Note: If the LED shower does not work well, please check if the water pressure reaches 0.2MPA.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for these
products.
ENGLISH
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the
2