Marta MT-1710 Manual De Instrucciones página 6

 Operating appliance always needs supervision. Bread inside could inflame!
 Don‟t touch appliance heating element. You could get burnt!
 Don‟t place into the toaster slots spread with butter or jam bread.
 Don‟t insert bread that is too large for the toaster.
 If bread stuck in the toaster, unplug the appliance. When the toaster cool down, take the bread out.
 Never take bread out with sharp utensils. They could damage heating element.
 Don‟t extract bread while the toaster is in use.
 Operating lever should be in top position when you unplug the appliance.
 Use toaster only with crumb tray. Clean crumb tray regularly.
BEFORE FIRST USE
 Please unpack your appliance. Remove all packing materials. Remove all stickers.
 Heat the toaster at maximum setting two times without bread in order to eliminate residual odour. As all new electric heating elements, a toaster creates a new smell when it is first time
switched on. This is quite normal and not a cause for concern.
 The appliance is ready for use.
USING THE TOASTER
 Make sure that operating lever is in top position. Plug the toaster to the power supply.
 Choose required toasting level – from 1 to 6.
 1-2 – light toasting or warm up
 3-4 – medium toasting

5-6 – maximum level of browning.
 Place bread into the bread slots. Please mind that thin slices are easier to be browned
 Press down the operating lever. The toaster will start running automatically and light indicator will go on.
 Bread slices will be ejected out and the appliance will shut down automatically when toasting is finished.
 Let the toaster cool down 15-20 seconds before next use.
 CANCEL FUNCTION Toasting could be cancelled anytime during toasting by pressing "CANCEL" button. Indicator light will shut down.
 Before toaster unplugging make sure that operating lever is in top position.
CLEANING AND MAINTENANCE
 Always unplug the appliance before cleaning.
 Let the appliance cool down completely.
 Pull the crumb tray out, empty it and place back.
 Clean the appliance housing if required, using soft material.
 Do not use chemical and abrasive cleaners.
 Keep the appliance in a dry cool place.
SPECIFICATION
6