FILTRO DE AIRE
El aparato cuenta con un filtro de aspiración (A3) que debe sustituirse cuando está
sucio o cambia de color. Para sustituirlo extráigalo como se indica en la figura. El
filtro ha sido realizado de forma que siempre está fijado a su alojamiento.
Utilice exclusivamente accesorios originales Nuvita.
Aparato de clase II
¡Atención! Consulte las instrucciones de uso
Cuando se apaga el
Encendido "ON"
aparato, el interruptor
interrumpe el
funcionamiento del
compresor solamente
Encendido "OFF"
sobre una de las dos fases
de alimentación
Conforme a: Norma Europea EN
10993-1"Evaluación Biológica de dispos-
itivos médicos" y a la Directiva Europea
93/42/EEC "Dispositivos Médicos"
CARACTERÍSTICAS TÉCNICAS
Aparato Mod.: 5020
Alimentación:
Presión Máx.:
Caudal de aire compresor:
Nivel de ruido (a 1 m):
Funcionamiento:
Condiciones de funcionamiento:
Condiciones de almacenamiento:
Conforme a la dir. 93/42 CEE
Homologaciones de seguridad:
(para Mod. P0111EM F400)
Dimensiones: (L)x(P)x(H):
Peso:
PARTES APLICADAS
Las partes aplicadas de tipo B son:
Nebulizador RF6 basic2
Capacidad mínima fármaco:
Capacidad máxima fármaco:
Presión de funcionamiento (con nebulizador):
Aparato de tipo B
Corriente alterna
Se prohíbe utilizar el aparato cuando se está
duchando o bañando
Marca CE médico ref. Dir. 93/42 CEE y poste-
riores actualizaciones
Homologación TÜV
ref. EN 60601-1 3a Edición
230V~ 50Hz 130VA
1.8 ± 0.3
9 LPM approx
54 dB (A) approx
continuo
Temperatura: min 10°C; max 40°C
RH Umidità aria: min 10%; max 95%
Presión atmosférica: min 69 KPa; max 106 KPa
Temperatura: min -25°C; max 70°C
RH Umidità aria: min 10%; max 95%
Presión atmosférica: min 69 KPa; max 106 KPa
16,8x17,2x10,7 cm
1,2 Kg
Accesorios del paciente (C3,C2,C4 ,C5)
2 ml
8 ml
0,65 bar approx.
Suministro :
MMAD:
Fracción respirable < 5 μm (FPF):
(1) datos detectados según procedimiento interno Flaem I29-P07.5
(2) Caracterización de cristal certificada por TÜV Rheinland LGA Products GmbH – Germany conforme con
el nuevo Estándar Europeo para aparatos de aerosolterapia, Norma EN 13544-1, ANNEX CC. Más detalles se
encuentran disponibles bajo pedido.
Disposal of device:In conformity with Directive 2002/96/EC, the symbol shown on the device to be disposed
of indicates that it is considered as waste and is therefore subject to "sorted waste collection". The user must
therefore take (or have taken) the above waste to a pre-sorted waste collection centre set up by the local
authorities, or else give it back to the dealer when purchasing a new appliance of the same type. Pre-sorted
waste collection and the subsequent treatment, recovery and disposal operations favor the production of
appliances made of recycled materials and Iimit the negative effects of any incorrect waste management
on the environment and public health. The unlawful disposal of the product by the user could result in
administrative fines as provided by art. 50 and subsequent amendments of Legislative Decree no. 22/1997.
Electromagnetic compatibility
This device has been designed to meet the current requirements for electromagnetic compatibility (EN 60601-1-
2:2007 Electromedical devices require special care during installation and use, with respect to EMC requirements. It is
therefore required that they be installed and/or used according to the manufacturer's specification. Potential risk of
electromagnetic interference with other devices, in particular with other devices for analysis and treatment I Radio
and mobile or portable RF communications devices (mobile phones or wireless connections) may interfere with the
operation of electromedical devices. For additional information visit the website www.my-nuvita.com.The Manufacturer
reserves the right to make technical and functional changes to the product without notice.
WARRANTY - TERMS AND CONDITIONS
This product benefits of a warranty of 24 months on material and manufacturing defects, starting from the
date of purchase (see sales slip).
The warranty of 24 months does not include damages caused by the usual use of parties identified as
"consumable" (e.g., batteries, brush heads or parts subject to usury).
The legal guarantee of 24 months is void if:
1.The product has undergone aesthetic damage due to improper use not in accordance with instructions in the manual.
2.This product has been modified and/or tampered with.
3.The cause of the failure was due to poor maintenance of the individual components and/or accessories
and/or supplies (e.g. oxidation and/or scaling due to the retention of water or other liquids, sediment
blocking the sensor, leak of corrosive liquid from batteries).
The following is excluded from the legal guarantee of 24 months:
1.Costs related to replacements and/or repair of parts subject to wear or costs for ordinary maintenance of the product.
2.The costs and risks involved in transporting the product to and from the store where you purchased or
otherwise authorized collection centre to receive the products under warranty.
3.Damage caused by or resulting from improper installation or improper use not in accordance with the
directions in the instruction manual.
4.Damage due to natural disasters, accidental events or adverse conditions not compatible with the product.
5.Defects that have a negligible effect on product performance.
The manufacturer, distributor and all the parties involved in the sale do not assume any liability for losses
and economic damage from any malfunction of the product. In accordance with current regulations
the manufacturer, distributor and all the parties involved in the sale are not responding in any case for
damages, including direct, indirect ones, loss of net income, loss of savings and additional damage and
other details consequences going beyond the damage caused by the breach of warranty, contract, strict
liability, wrongdoing or due to other causes, resulting from the use or inability to use the product and/or
paper and electronic documents, including the lack of service.
For further information on the help service visit the website www.nuvitababy.com
0,32 ml/min aprox. Modo High speed
0,25 ml/min aprox. Modo Éstandard
3,8 μm Modo Éstandard
4 μm Modo High speed
62 % Modo Éstandard
63 % Modo High speed