GARZA Tajo Manual Del Usuario página 33

27
LINKAGE OF IRRIGATION WITH THE APP / WIFI
17
Riego Tajo
TEST
Once the devices are installed and paired, follow these steps to verify that everything is working correctly.
1
1. Close the tap on which the Tajo Controller is installed.
2. Press either of the two manual irrigation control buttons (left or right) until a click sounds. The internal valve of
the Tajo Controller will have opened.
3. Press either of the two manual irrigation control buttons (left or right) until a click sounds. The internal valve of
the Tajo Controller will have closed.
4. Open the tap slightly and press the same manual control button several times that you pressed before (right or
left). If the water flows and stops flowing based on the pulse, the test will have been successfully completed. If
the system does not respond correctly, please repeat the test from the beginning.
5. Open the tap fully to use the Tajo Controller normally.
Hub Tajo
Hub Tajo Controlador de riego Tajo
2 3
clic!
When your Garza Smart app finds both devices (Hub and
Tajo Controller), press finish*. You can modify the name of
your Tajo Controller and your WiFi plug and indicate the
room in which it is installed (optional). Click finish again
and the linking process is complete.
*The Hub can only be used as a WiFi socket if
system-wide pairing has been completed as outlined
here.
10%
4
clic!
28
100%
5