Descargar Imprimir esta página

LD Systems TR 206 Manual De Usuario página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
ATTENTION:
1. Do not install or use the device in the vicinity of radiators, heat accumulators, stoves,
or other heat sources. Ensure that the device is always installed in such a way that it
can be sufficiently cooled and cannot overheat.
2. Do not place ignition sources such as lighted candles near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the device.
6. Observe the IP protection class as well as the ambient conditions such as
temperature and humidity according to the specification.
7. Devices can be continuously further developed. Should there be any discrepancies
between the operating instructions and the device labelling with regard to
operating conditions, performance or other device characteristics, the information
on the device always takes precedence.
8. The device is not suitable for tropical climates and for operation above 2000 m
above sea level.
CAUTION:
Connecting signal cables can cause a lot of noise. Make sure that devices connected to
the output are muted when plugged in. Otherwise, noise levels may cause damage.
CAUTION: HIGH VOLUME AUDIO PRODUCTS!
This device is designed for professional use.
The commercial operation of this device is subject to the applicable national
regulations and guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: Use of this product
may generate high sound pressure levels (SPL) that may cause hearing damage.
Avoid exposure to high volumes.
INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT
1. Devices for installation applications are designed for continuous operation.
2. Devices for indoor installation are not weather-resistant.
3. Surfaces and plastic parts can also age in installation equipment,
e.g. due to UV irradiation and temperature fluctuations.
This generally does not impair functionality.
4. With permanently installed devices, the accumulation of impurities,
e.g. dust, is to be expected. Always observe the care instructions.
5. Unless explicitly stated otherwise on the device, the devices are intended
for installation heights of less than 5 m.
6

Publicidad

loading

Este manual también es adecuado para:

Tr 212