Publicidad
Idiomas disponibles
Idiomas disponibles
&
WARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1. Depress clutch/brake
pedal fully and set parking brake.
2. Place gearshift lever in neutral (N) position.
3. Place attachment
clutch
in "DISENGAGED"
position.
4. Turn ignition key to "STOP" and remove key.
5. Make sure the blades and all moving parts have completely
stopped.
6. Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier to remove
from the
right side of tractor.
1. Place
attachment
clutch
in "DISEN-
GAGED" position.
2. Move attachment
lift lever forward
to
lower mower to its lowest position.
3. Roll belt off engine pulley.
4. Remove small retainer spring, and re-
move clutch spring off pulley bolt.
5. Remove large retainer spring, slide col-
lar off and push housing
guide out of
bracket.
6. Disconnect
anti-sway
bar from chassis
bracket by removing retainer spring.
7. Disconnect
suspension
arms from rear
deck
brackets
by removing
retainer
springs.
8. Disconnect
front links from deck by re-
moving retainer springs.
9. Raise liftleverto
raisesuspension
arms.
Slide mower out from under tractor.
IMPORTANT:
If an attachment
other than the
mower
deck is to be mounted
on the tractor,
remove
the front
links and hook the clutch
spring
Into square
hole in frame.
TO INSTALL
MOWER
1.
Raise attachment
lift lever to its highest
position.
2.
Slide mower
under tractor
with deflector
shield
to right side of tractor.
3.
Lower
lift lever to its lowest
position.
4.
Connect
front
links to mower
deck
and
secure
with retainer
springs.
5.
Connect
suspension
arms to rear deck
brackets
and
secure
with
retainer
springs.
6.
Connect
anti-sway
bar to chassis
bracket
and secure
with retainer
spring.
7.
Push
clutch
cable
housing
guide
into
bracket,
slide collar onto guide and secure
with large retainer
spring.
8.
Place
flat washer
and clutch
spring
on
idler
pulley
bolt and
secure
with small
retainer
spring.
9.
Install
belt onto engine
pulley.
Clutch S
Small Retainer Spring
Clutch Spring
Retainer Spring_
Front Link
Anti-Sway
Housing
\
Retainer Springs
Both Sides)
Bracket
Deflector Shield
Large Retainer Spring
21
Publicidad
