Costway FH10064 Manual Del Usuario página 7

Troubleshooting
Problem Possible Cause
Screws 1. Screws were turned
can not be in the wrong directions.
tightened. 2. Did not use screw
driver.
3. Screws were not
pointed toward the
holes.
Can't find Might be hidden inside
any or behind a packaging.
hardware.
Weird 1. Assembly failure
Sound, caused by incorrect
Unstable. assembly steps.
2. Screws are loose.
Missing 1. Might be lost during
Parts transportation.
2. Might be accidentally
thrown out during
assembly process.
12
Solution
1. Align the screw with
screw hole, and start
screwing in clockwise
direction.
2. Use appropriate
screw driver tip.
Please check the parts
before unpacking, do
not throw away the
packaging before the
machine is fully
assembled.
1. Please refer to the
User's Manual to ensure
safe and correct
assembly.
2. Re-tighten the
screws.
3. Contact the customer
service for help.
Please contact us and
we will reship the
missing parts to you.
Maintenance
The product is safe and complete for use only if the equipment
is regularly inspected and repaired. It is the responsibility of the
user or owner to ensure that the equipment is regularly
serviced. Worn or broken parts should be replaced immediately
before continuing to use the product.
1. To prevent dust accumulation, please wipe the dumbbell
bench regularly.
2. Only use a wet rag on plastic parts; on steel racks, only use a
dry rag, etc.
3. If necessary, wipe the parts of the device clean.
4. Avoid cleaning agents that contain acidic chlorine and
cleaning agents that contain abrasive particles, which can
scratch and damage equipment.
5. Periodically check to ensure all parts are secure and in
working order. If a part is damaged, do not use it until it is
repaired.
This manual is for reference only, subject to the actual
product.
13