Publicidad
Idiomas disponibles
Idiomas disponibles
Before gou call for service...
Troubleshooting Tips
Labels on the exterior
of the washer will not
peel off cleanlg
Movement inside
machine when shut off
No rinse fill
Possible Causes
What To Do
Occasionallg
the adhesive
used on the labels does
not release cleanlg
• Use a hair drger set at the lowest heat setting, directing
the air at the label for a short amount of time. This will
releasethe adhesive easily, without damaging the surface
of the washer.
Shifting mechanism
is
disengaging
the motor
• When the machine is manually turned off, the shifter
will disengage the motor before completelg shutting
down. If the lid is raised before the motor is disengaged,
it will resume when lid is closed.
This is normal
• This machine uses three low-water sprag rinses to remove
soap from clothes and reduce water consumption.
12
Publicidad
