Publicidad
Idiomas disponibles
Idiomas disponibles
■
Audio
•
For how to select the setting items and options, refer to "
Setting items
BD Audio Mode
For BD, selects whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to "Setting the BD
Audio Mode" on page 30.
HDMI Audio Out
Sets the audio format for the
audio output from HDMI OUT jack.
Down Sampling
Sets the digital audio output
when playing back BD or DVD
recorded in LPCM.
DRC
Sets whether to compress the
range of sound volume (dynamic
range control) when Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD audio is played back.
Virtual Surround
Sets to create a surround effect in
a system with 2 speakers
connected.
•
Settings with (*) are the default.
•
"Quick" menu consists of the setting menus frequently used, and they are accompanied with
•
Under following circumstances, "HDMI Multi(Normal)" and "HDMI Multi(LPCM)" are not available.
- HDMI cable is not connected to HDMI OUT jack.
- Connected TV is off.
- Connected TV is not compatible with audio output.
•
Set "Virtual Surround" setting to "Off" or lower the volume if the sound is distorted.
•
For the virtual surround, audio signal will always be 2-channel LPCM.
36
FUNCTION SETUP
Audio
BD Audio Mode
Mix Audio Output
HDMI Audio Out
HDMI Multi (Normal)
Down Sampling
On
DRC
Auto
Virtual Surround
Off
Mix Audio Output*:
Outputs the secondary and interactive audio with primary audio if it is available.
HD Audio Output:
Outputs only the primary audio. Set this mode in order to output Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD
through HDMI connection.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from HDMI OUT jack with
bitstream or LPCM.
HDMI Multi(LPCM):
The multi-channel audio signals are output from HDMI OUT jack with LPCM.
•
Refer to pages 37-39 for setting options.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format from DIGITAL OUT jack.
•
Refer to "Digital out setting" on page 37 for setting options.
On*:
LPCM signals are converted to 48 kHz for output.
•
Set to "On" when using digital connections to an AV amplifier that is not
compatible with sampling frequencies of 96 kHz.
Off:
For BD and DVD recorded in LPCM without copyright protection, 2-channel
audio signals up to 192 kHz are output as LPCM signals with no conversion.
Auto*:
When the discs recorded in Dolby TrueHD format are in playback, this unit detects
DRC setting of the disc and set "DRC" setting to "On" or "Off" automatically.
Off
On
Off*:
Virtual surround is set to off.
1:
A natural surround effect in a system with 2 speakers connected.
2:
A stronger surround effect in a system with 2 speakers connected than "1".
Custom" on page 32.
Options
.
EN
Publicidad
