Publicidad
Idiomas disponibles
Idiomas disponibles
ActiveX is installed and the monitor screen shows up.
9. Setting the camera
* Selecting a mode on the monitor screen
Choose a mode from "Monitor", "Setting" and "Maintenance".
* The camera settings (automatic gain control, backlight compensation, automatic electronic
shutter, flickerless function on/off) can be made in "Camera" in the "setting" mode.
* The camera's IP address (initial setting 192.168.1.100) can be changed in "IPv4" in the
"setting" mode.
* For details, download the Applied Instructions from the following URL.
The Applied Instructions can be downloaded from the following URL.
URL http://www.ikegami.co.jp/en/products/security/network/index.html
* Simplified set-up tool
This tool helps change the network camera/encoder's IP address in a simple way. To
change the IP address on multiple units, this is very convenient.
You can download the tool (software) from the above website. Before use, carefully read
the "Simplified Set-up Tool" instructions.
Making the IP address and other settings
IMPORTANT !
The document includes the following topics.
* Connecting the camera and encoder
* Making basic settings (Camera setting, IP address change)
* Using the alarm function
* Operating the camera
* Making other settings
* Maintenance
* Troubleshooting
* Glossary
E-11
Publicidad
