LG WM2677H Serie Manual Del Propietário página 22

TROUBLESHOOTING GUIDE
Problem Possible Cause
- Water supply is not adequate
in area
• Water supply taps are not
completely open
• Water inlet hose is bent
• The filter of the inlet hose
clogged
• Drain hose is bent
or clogged
• The drain filter is clogged
• Load is too smaIL
• Load is out of balance
• The appliance has an imbalance
detection and correction system
ff individual heavy articles are
loaded (bath mat, bath robe,
etc ) and the imbalance is too
great, after several atlempts to
restart the spin cycle the
machine wilt stop and the error
code will be displayed
Solution
Check another tap in the house
Fully open tap
Straighten hose
Check the filter of the inlet hose
Clean and straighten the drain hose
Clean the drain filter
Add t or 2 similar items 1o help
balance the toad
Rearrange load to aIlow proper
spinning
• Is the door opened or not Close the door completely
completely closed? =_ If dE is not released, call for service
Unplug the power plug and call for service
• The water overfills due to the
faulty water valve
• The water level sensor
malfunction
• Overload in motor
• Overload in motor
Close the water tap
Unplug the power plug
Call for service
• The washer experienced a Restart the cycle
power failure
22