Triton Blue Q-WASH740Z Manual De Usuario página 15

PARTS DESCRIPTION
Control Panel
SETTING
1.- Mounting
The Moving Head is fully operational in any mounting position, hanging
upside-down, side mounted, or set on a flat llevel surface, etc.
IMPORTANT: Safety cables must always be used when unit is celling or
truss mounted. The safety cable must be capable of holding 10 times
2.- AC Power
1) The fixture is designed to work on AC 90-240V 50-60Hz. All units
must be powered directly from a switched circuit. This unit cannot be
run on a rheostat or dimmer circuit even if used solely for a 0% to
100% switching.
WARNING: All fixtures must be connected to circuits with a suitable
the weight of the fixture.
Earth Ground.
User Manual | Q-WASH740Z by Triton Blue | For Professinal use only, not for residential use
Power In/Out
Fuse On/Off
DMX In/Out
15.