Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING THE BATTERY
To insert or change the battery, switch off the device first. Loosen the screws located at the edges of the base plate. Do not
loosen the three screws in the middle of the base plate. Carefully remove the base plate. Take care not to damage the cable.
Change the battery.Remount the base plate without squeezing the cables. Insert and tighten the screws.
CONECTION
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of
the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the
last DMX device in the daisy chain is terminated with a resistor (110 Ω, 1⁄4 W).
DMX
POWER
10
10
10
10
10
10
8
8
8
8
8
8
6
6
6
6
6
6
4
4
4
4
4
4
2
2
2
2
2
2
0
0
0
0
0
0
TR-DMX6-2
WARRANTY
• Warranty service is only valid under normal use.
• All man-made damage, such as inadequate access to power, the use of
inappropriate accessories, non manual use, damage for transport and other
accidents, non- approved repair or modification, misuse or damage caused by
negligence, improper installation, are not in warranty.
• This warranty does not cover accessories, vulnerable parts, assistive devices,
transportation and maintenance personnel on- site service fee.
• When you can not solve the problem or have questions, please contact us.
10
8
6
4
2
0
Publicidad
