Commercial Electric POWERFLOOD X Guía De Uso Y Cuidado página 5

Installation
1
For best results
The light fixture (A) must be mounted
using the threaded knuckle (D) into a
weather proof cover (not included) on
a junction box (fig 2) or a landscape
ground stake (not included) (fig 3). t
(fig 2).
Mounted to weather proof
cover with 1/2" NPSM Pipe
Thread (sold separately)
INFORMATION Weather proof cover plates for
junction boxes, landscape ground stake and other
mounting arms and accessories are available.
Please contact your retailer or Commercial Electric
customer support.
2
Shut off electric power
Verify wall switch is in OFF position (fig 5).
At the main electrical panel, turn off
the circuit breaker that supplies power
to the junction box you are working on
(fig 6).
For screw-in type fuses, unscrew the
fuse that supplies power to the junction
box you are working on (fig 7).
(fig 3).
Mounted to landscape ground
stake with 1/2" NPSM Pipe
Thread (sold separately)
NOTE:
(fig 5).
5
(fig 1).
Ground Mount
While using the light fixture (A) as eave mounted
NOTE:
(fig 1), the photocell sensor (B) may not function properly.
In this case, it is advisable to use the light fixture (A) with
switch-control mode.
(fig 6).
(fig 4).
(fig 7).