Publicidad
FMI-S
Declaración
de conformidad
Declaration of Conformity
Déclaration de
Conformité
Konformitätserklärung
Dichiarazione di
conformità
www.alluris.de
According EC-Directive 2004/108/EG
(EMC - electromagnetic compatibility)
We hereby confirm that the below designated product is designed and manufactured in ac-
cordance to the general saftety and health requirements of EC-Directive 2004/108/EG (EMC).
With any non-authorized changes of the device or application this declaration becomes void.
Manufacturer:
Type Number:
Description:
Serial Number:
Applicable standards:
The compliance to the requirements of all applicable EU directives is confirmed by the CE-
marking of the product.
für Alluris GmbH & Co. KG
Freiburg, 13.08.2011
(Klaus Hartkopf - Geschäftsführer)
Confirmation acc. DIN EN 10204, 2.1 (Calibration)
We hereby confirm in accordance to DIN EN 10204, 2.1 that this instrument has been tested
in accordance with ISO 9001:2008 approved procedures. The instrument meets all specified
technical data's and the accuracy was tested better than the accuracy stated in the technical
data.
The equipment and weights used for test and calibration are traceable to the international
recommended (ILAC) and approved standards of the DAkkS (Deutsche Akkreditierungsstelle
GmbH) at the Physikalisch-Technischen Bundesanstalt (PTB).
Alluris GmbH & Co. KG
Basler Strasse 65
DE 79100 Freiburg, Germany
FMI-S10xx; FMI-S20xx; FMI-S30xx; (see type label)
Digital Force Gauge
see type label
EN 55022 (RF Emission)
EN 61000-4-2 (ESD)
EN 61000-4-3 (RF Field)
EN 61000-4-4 (Burst)
EN 61000-4-8 (Magn. Field)
In accordance to WEEE Directive 2002/96/EC this device is ca-
tegorized as "Monitoring and Control Instrument" and should
not be disposed as unsorted municipal waste. You may return
it to Alluris for recycling (WEEE Reg.No. DE 49318045). For more
information please contact our website www.alluris.de.
Class B
Critera A
Criteria A
Criteria A
Criteria A
Publicidad
