Publicidad
Idiomas disponibles
Idiomas disponibles
6.Use Instructions
Power on and off the machine
• Tap and hold the
button for 3 seconds to power on the machine.Then, the power indicator is on, and the vacuum
cleaner enters the standby state. Tap and hold the
• Note: The robot in the charging state cannot be powered off.
Cleaning/Pause
Once the machine powers on, tap the
button on the robot or use the controller or the smart APP to start cleaning.
Note:
• The machine cannot clean liquid.
• If the power is lower than 15%, the machine cannot work. Therefore, charge the machine before cleaning.
• If the power is lower than 15% during cleaning, the machine will automatically return back to the dock for charging.
• Before cleaning, tidy up all kinds of wires on the ground (including the power cord of the dock). Otherwise, the machine may drag the
wires while cleaning, which may cause power failures of other electric appliance or damage items or wires.
UK: AfterserviceUK@honiture.com / US&CA: support02@honiture.com
EN
If you have any questions please email to
16
button for 3 seconds to power off the machine.
Charging
Auto mode: After cleaning, the robot automatically returns to the dock for charging.
Manual mode: In the pause state, press the
button to activate the "return for charging" mode or use the controller or
the smart APP for charging.
Virtual wall
The magnetic strip can be set to separate restricted zones (such as washing rooms and kitchens).
Note: Fix the magnetic strip to the ground to avoid peeling off; otherwise affecting the result of the visual wall.
UK: AfterserviceUK@honiture.com / US&CA: support02@honiture.com
If you have any questions please email to
Magnetic strip
17
EN
Publicidad
