Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Gongratulations to the purchase of this Beamz light effect. Piease read this manual thoroughly prior to using the unit in order to benefit fully from
all
features.
Read the manual prior to using the unit. Follow the instructions in ordernot to Invalidale the
warranty.
Takeall precautions to avoid fire and/or
electrical
shock.
Repairs must only be carrled out by a qualified techniclan in order to avoid electrical
shock.
Keep the manual for future
reference.
-
Prior to using the unit, please ask advice from a specialist When
the unit is switched on for the first time, some smell may
occur.
This
is normal and will disappear alter a
while.
-
The unit contains voltage carrying
parts.
Therefore do NOTopen
the
houslng.
-
Do not place meta I objects or pour liquids into the unit This may
cause electrical shock and
malfunction.
-
Do not place the unit near heat sources such as
radiators, etc.
Do
not place the uni! on a vibrating
surface.
Do not cover the
Ventilation
holes.
- The uni! is not suitable for continuous
use.
-
Be careful with the mains Iead and do not darnage
it.
A faulty or
damaged mains Iead can cause electrical shock and
malfunctlon.
- When unplugging the unit from a mains
outlet,
always pull the plug,
never the
Iead.
- Do not plug or unplug the unit with wet
hands.
- lf the plug and/or the mains Iead are damaged, they need to be
replaced by a qualified
technician.
-
lf the unit is damaged to such an extent !hat internal parts are
visible,
do NOT plug the uni! into a mains outlet and
00
NOT
switch the unit on
.
Contact your
dealer.
Do NOT connect the unlt to
a rheostat or dimmer.
-
To avoid fire and shock
hazard,
do not expose the uni! to rain and
moisture
.
- All repalrs should be carried out by a qualifled technician
only.
-
Connect the uni! to an earthed mains outlet (220-240Vac/50Hz)
- To prevent accidents in companies, you must follow the applicable
guide lines and follow the
lnstructions.
- Secure the
uni!.
with an extra safety chain lf the uni! is ceiling mount.
Use a truss system with
clamps.
Make sure nobody stands in the
mounting area. Mount the effect at least 50cm away from
inflammable material and leave at least 1 meter space on every
side to ensure sufficient
cooling.
- This uni! contains high intenslty LEDs. Do not Iook into the LED
light to prevent darnage to your eyes.
- Do not repeatedly switch the fixture on and
off.
This shortens the
llfe
time.
- Keep the unit out of the reach of children
.
Do not leave the unit
unattended.
- Do not use cleaning sprays to clean
switches.
The residues of
these sprays cause deposits of dust and
grease.
ln case of
malfunction, always seek advice from a specialist
- Only operate the unit with clean
hands.
- Do not force the
controls.
-
lfthe uni! has fallen
,
always have it checked by a qualified
technician before you switch the uni! on
again.
-
Do not use chemieals to clean the uni!. They darnage the
varnlsh.
Only clean the uni! with a dry
cloth.
- Keep away from electronic equipment that may cause interference.
- Only use original spares for
repairs,
otherwise serious darnage
and/or dangerous radlation may
occur.
protected by a 1 0-16A fuse
.
- Switch the uni! off prior to unplugging it from the mains and/or other
-
During a thunderstorm or if the uni! will not be used for a Ionger
equipment. Unplug allleads and cables prior to moving the
uni!.
period of
time,
unplug it from the
mains.
The rule
is:
Unplug it from
- Make sure that the mains Iead cannot be damaged when people
the mains when not in
use.
walk on it. Check the mains Iead before every use for damages and
- lf the uni! has not been used for a Ionger period of
time,
faults!
condensation may
occur.
Let the uni! reach room temperature
- The mains voltage is
220-240Vac/50Hz.
Check if power outlet
before you switch it on
.
Never use the uni! in humid rooms or
match.
lf you
travel,
make sure !hat the malns voltage of the country
outdoors.
is suitable for this uni!.
- Du ring
Operation,
the housing becomes very hot. Do not touch it
Keep the original packing material so !hat you can Iransport the unit
during operation and immediately
alter.
in safe conditions
A.
This mark attracts the attentlon of the user to high voltages !hat are present Inside the housing and !hat are of sufficient magnitude to cause
a shock
hazard.
A,
This mark attracts the attentlon ofthe user to important instructions !hat are contained in the manual and !hat he should read and adhere
to.
Aoo
NOT LOOK DIRECTLY INTO THE
LENS.
This can darnage your eyes. Persons who are subject to epileptic attacks should be aware of
the effects that this light effect may have on them
.
The uni! has been certified CE. lt is prohibited to make any changes to the uni!. They would Invalidale the CE certificate and their guaranteel
NOTE: To make sure !hat the unit will function
normally,
it must be used in rooms with a temperature between 5€/41
<fi
and
35€/95<4>.
General description:
This Lighteffect generates a dazzling light show of lightning in the globe. Touching the glass will attract lightning to your
fingertips.
Placing:
Remove the device from the box and place it on a solid
surface.
Then Insert the adapter plug into the uni! (side) and Insert the adapter into the
outlet. The device is ready for
use.
Use:
On the back of the device is a switch with 3
positions.
(Off Isound activated
I
on).
lf the ball is touched with the
fingertips,
the produced beam will focus itself to this point. ln this way the pattern in the Plasma Ball will be
influenced continuously and you will have endless fun
.
Specifications:
Power
supply: ... .........................................................
220-240 Vac /50 Hz (via adaptor)
Ball
diameter:
...
... ...
................... .....
........
......
.....
..
.........
....
.......................... ..........
20 cm
Weight:
......................
.......................................
...
................................................
0.7 kg
Publicidad
