Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
In case of mini-function, please refer to the following table
Problem
3 lamps for
power
indicator
flicker.
power
brush
does not
work.
Running
time
shortened.
The vacuum
has no
suction
power.
Not
charging.
Possible causes
The rolling bar is wrapped.
Temperature is too high or
low.
Brush is trapped by hair
or larger debris.
Battery needs to be
replaced. Ambient
temperature is too high or
too low.
Battery is no fully changed.
The dust cup is full.
The filter is blocked.
Suction inlet of brush or
another accessory is
blocked.
Parts of the appliance is
not fully dried after
cleaning.
Ambient temperature
when charging is too low
or too high.
Solution
Cleaning the rolling bar
Move the vacuum to
suitable temperature.
Ensure that no hair or
other thread is trapped
around the brush and
check brush area for
larger debris.
Contact the shop or
after sales service to
replace the battery fat
the user's own cost.
Your vacuum should
only be operated in
suitable ambient
temperature
The battery needs
charging.
Clean the dust cup
after use to prevent
build ups.
Remove any dust or
debris from the filter.
Check for blockages at
brush and other
attachment points.
Ensure that all
components are
properly dried after
Washing.
Charge the machine
under the right
temperature
environment (5℃-
40℃).
EN-39
Publicidad
