GE Zoneline AZ9VH Manual Del Propietario Y Instrucciones De Instalación página 23

Installing the Zoneline
9. Make electrical connections to unit (cont)
ELECTRICAL CONNECTIONS - DIRECT CONNECT
3. Make Wire Lead Connections Inside the Junction Box
2. Select the applicable wiring situation and follow the
instructions accordingly:
• 1-Phase 220-240 VAC
When connecting the Zoneline to a single-phase
circuit for 230V applications:
should be identified by the installer using electrical
Connect the green lead of the power supply kit to
the power supply and branch circuit ground.
• 3-Phase 208 VAC
should be identified by the installer using electrical
Connect the green lead of the power supply kit to
the power supply and branch circuit ground.
• 3-Phase 265 VAC
When connecting the Zoneline to a single leg of a
three-phase 265V application:
power supply kit to the branch circuit Neutral and
lead of the power supply kit to the power supply
and branch circuit ground.
NOTICE:
and oriented vertically.
49-5000640 Rev. 2
APPLICATIONS
be connected to the branch circuit ground wire.
three screws removed earlier.
MUST
Secure wires
23