Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING HYDROSTATIC BELT
Remove
(Figure
16)
1. Remove PTO belt (see REPLACING
PTO BELTon
page 23).
2. Disconnect
Electric Clutch Connector
from PTO.
CAUTION:
Use care when
releasing idler spring tension.
Keep body parts well away from
idler when performing this
operation.
3. Disconnect idler spring.
4. Remove hydrostatic belt from
hydrostatic transmission
pulleys, pulley,
electric clutch, and idler.
Install
(Figure
16)
1. Install hydrostatic belt on idler, electric
clutch, pulley, and hydrostatic
transmission
pulleys.
2. Connect idler spring.
3. Connect electric clutch connector.
4. Install PTO belt (see REPLACING
PTO
BELTon
page 23).
1
\
1.
2.
Hydrostatic Belt
Hydrostatic
Transmission
Pulley
3.
Idler
4.
Idler Spring
Figure 16
GB - 24
Publicidad
